Wonder marine motor industry gained the authentication from many international Bureau of shipping. These motors are designed for energy conservation, which is very important considering factor for the application of shipping. The most common application is with the boat’s fan, pump, air blower, hydraulic device, propeller, thrustor, compressor, deck machinery, steering arrangement, windlass, oil separator, winch and lifter.

Specially designed for shipping device, its excellent performance and reliability are widely applied to global major marine equipment production industries.

The material of motor housing use high intensive casting, and has the good quality to resist the striking.

The surface of motor is disposed according to the different kinds of severe environment of the ocean, has the excellent ability to resist moisture, mildew, and salt milt resistant.
Moreover, it was applied to the requirements for power supply and frequency from every countries’ marine equipment, not only can be used 380V/50Hz, but also for 440V/60Hz
Some series of three phase asynchronous marine motors are the latest marine motor with mechanical equipment of M2000 produced by ABB.

The housing uses intensive casting to avoid being hurt second time. After specially design and produce, it has some advantages, like high efficiency, the large staring torque etc,. which can  be applied to all kinds of machinery driving for shipping, such as pump, fan, separator, hydraulic machinery, auxiliary device and other devices that are similar to that for shipping. The motor are strictly designed according nation’s standard GB755《The rated value and function of rotated motor》and “the standard of steel made marine motor construction”, and get the approval from National bureau of shipping, the recognized certificate from china classification society, conform to ABS,BV, DNV, GL, IEC, KR, LR, NK etc., international standards and relevant requirements of classification society.

Dipping paint and surface processing: the winding of motor and the surface of metal parts are with specially dipping paint and processing according to the requirements of hot and humid motor, and it has a good ability to resist humid, mould, salt milt.